• La 16 Loetse 2021

Sekoti se entsoeng ka metalized se bolela hore ka mor'a lesoba la ho phunya (ho cheka, gong groove), joale ea 2 e phunngoa le ho bōptjoa, 'me qetellong halofo ea lesoba la metalized (groove) e bolokiloe.E le ho laola tlhahiso ea mapolanka a tšepe halofo-sekoti, baetsi ba boto ea potoloho hangata ba nka mehato e itseng ka lebaka la mathata a tshebetso mateanong a likoti halofo-metallized le masoba non-metallized.Metallized half-hole...

• La 28 Loetse 2021

Mang kapa mang ea amehang ka har'a indasteri ea potoloho e hatisitsoeng (PCB) oa utloisisa hore li-PCB li na le liphetho tsa koporo holim'a tsona.Haeba li siiloe li sa sireletsoa joale koporo e tla oxidize le ho senyeha, ho etsa hore boto ea potoloho e se ke ea sebelisoa.Qetello ea bokaholimo e theha sehokelo sa bohlokoa lipakeng tsa karolo le PCB.Qetello e na le mesebetsi e 'meli ea bohlokoa, ho sireletsa potoloho ea koporo e pepesitsoeng le ...

• La 29 Mphalane 2021

1. The foreimi e ka ntle (clamping side) ea Printed Circuit Board panel e lokela ho nka moralo o koetsoeng oa loop ho etsa bonnete ba hore PCB jigsaw e ke ke ea holofala ka mor'a hore e lokisoe holim'a sebopeho;2. PCB phanele bophara ≤260mm (SIEMENS line) kapa ≤300mm (FUJI line);haeba ho fana ka boiketsetso ho hlokahala, bophara ba phanele ea PCB × bolelele ≤125 mm×180 mm;3. Sebopeho sa jigsaw ea PCB se lokela ho ba haufi le sekoere joalo ka poss...

• La 05 Pulungoana 2021

SMT(Printed Circuit Board Assembly, PCBA) e boetse e bitsoa thekenoloji ea holim'a metsi.Nakong ea ts'ebetso ea tlhahiso, peista ea solder e futhumala ebile e qhibiliha sebakeng se futhumatsang, e le hore li-pads tsa PCB li kopane ka botšepehi le likarolo tsa holim'a metsi ka motsoako oa solder paste.Re bitsa mokhoa ona reflow soldering.Bongata ba liboto tsa potoloho li na le tšekamelo ea ho kobeha le ho kobeha ha boto ha li theoleloa...

• La 11 Pulungoana 2021

HDI boto, phahameng segokanyipalo interconnect hatisitsoeng oa potoloho boto HDI mapolanka ke e 'ngoe ea thekenoloji e hōlang ka potlako ho PCBs' me hona joale e fumaneha ka ABIS Circuits Ltd. HDI mapolanka na le foufetseng le/kapa ho patoa vias, 'me hangata na le microvias tsa 0.006 kapa tse nyenyane bophara bophara.Li na le sekhahla se phahameng sa potoloho ho feta liboto tsa potoloho tsa setso.Ho na le mefuta e 6 e fapaneng ea liboto tsa HDI PCB, ho tloha holimo ho ea ho ...

• La 15 Tšitoe 2021

Vias ka boto ea potoloho e bitsoa vias, tse arotsoeng ka likoti, masoba a foufetseng le masoba a patiloeng(HDI Circuit Board).Li sebelisoa haholo-holo ho hokahanya lithapo ka lihlopha tse fapaneng tsa marang-rang a tšoanang 'me ka kakaretso ha li sebelisoe e le likarolo tsa soldering;Lithapa ka boto ea potoloho li bitsoa li-pads, tse arotsoeng ka liphaephe tsa pin le holim'a marulelo a holim'a metsi;li-pin pads li na le masoba a solder, a...

• La 02 Hlakubele 2022

Ka ho fihla ha nako ea tlhahisoleseling ea dijithale, litlhoko tsa puisano ea maqhubu a holimo, phetisetso ea lebelo le holimo, le lekunutu le phahameng la likhokahanyo li ntse li phahama.Joalo ka sehlahisoa sa bohlokoa sa ts'ehetso bakeng sa indasteri ea mahlale a tlhahisoleseling, PCB e hloka hore substrate e kopane le ts'ebetso ea maemo a tlase a dielectric, tahlehelo ea media e tlase, mocheso o phahameng ...

• La 23 Hlakubele 2022

Tsoelo-pele e potlakileng ea liindasteri tsa thelefono, lisebelisoa tsa elektroniki le tsa puisano li khothalelitse kholo e tsoelang pele le kholo e potlakileng ea indasteri ea boto ea potoloho ea PCB.Batho ba na le litlhoko tse ngata bakeng sa palo ea lihlopha, boima ba 'mele, ho nepahala, thepa, mebala, le ho tšepahala ha likaroloana.Leha ho le joalo, ka lebaka la tlholisano e matla ea theko ea 'maraka, litheko tsa thepa ea boto ea PCB le tsona li ntse li phahama ...

• La 05 Motšeanong 2022

Boto ea potoloho e nepahetseng e bua ka tšebeliso ea bophara ba mela e metle / sebaka, masoba a manyane, bophara bo moqotetsane ba selikalikoe (kapa ho se be bophara ba selikalikoe), le masoba a patiloeng le a foufetseng ho fihlela boima bo phahameng.'Me ho nepahala ho phahameng ho bolela hore sephetho sa "tšesaane, tse nyenyane, tse tšesaane, tse tšesaane" li tla tlisa litlhoko tse phahameng tsa ho nepahala, ho nka bophara ba mohala e le mohlala: O. 20mm line bophara, ho ea ka melao ea ho hlahisa O. 16 ...