1,铜箔基材CCL (FPC Copper Clad Laminate)

Waxay ka kooban tahay saddex lakab oo bireed naxaas ah + xabag + substrate.Intaa waxaa dheer, waxaa sidoo kale jira substrates non-dhesive, taas oo ah, isku-dar ah laba lakab oo bireed copper + substrate, kaas oo aad u qaali ah oo ku haboon.
Alaabooyinka u baahan in ka badan 10W jeer nolosha foorarsiga.

1.1 bireed naxaas ah
Xagga agabka, waxa loo kala qaybiyaa naxaasta duuban (Rolled Anneal Copper Foil) iyo copper electrolytic (Electrodeposited Copper).
Foil), marka la eego sifooyinka, sifooyinka farsamada ee naxaasta duuban ayaa ka fiican, inta badan naxaasta duuban ayaa loo isticmaalaa marka loo baahdo dabacsanaan.dhumucdiisuna
Loogu talagalay 1/30Z.1/20Z.10Z2OZ iyo afar nooc oo kale.

1.2 CCL
Marka la eego agabka, waxa loo qaybiyaa PI (Polyamide) Film iyo PET (Polyester) Filimka.Qiimaha PI waa ka sarreeyaa, laakiin waa
Waxay leedahay iska caabbinta ololka oo ka sii wanaagsan, qiimaha PET-na wuu hooseeyaa, laakiin ma aha mid u adkaysta kulaylka.Sidaa darteed, haddii ay jirto baahi loo qabo alxanka, badankoodu waxay isticmaalaan walxaha PI.Guud ahaan dhumucda
1/2mil, 1mil, 2mil.

1.3 Xabag
Guud ahaan waxaa jira laba nooc oo xabag ah: Acrylic (xabagta akril) iyo Epoxy (koolada epoxy).Inta badan la isticmaalo waa xabagta Epoxy.dhumucdiisuna
0.4 ~ 2mil ayaa diyaar ah, guud ahaan isticmaal xabag qaro weyn oo ah 18um.

2, Filimka daboolan
Filimka daboolka ah wuxuu ka kooban yahay maaddada aasaasiga ah + xabagta, iyo alaabteeda aasaasiga ah waxay u qaybsan tahay PI iyo PET.Dhumucdiisu waa 0.5 ilaa 1.4mi.

3, Adag Qalabka xoojinta)
3.1 Shaqada: Si loo dhufto qaybo ka mid ah aagga degaanka ee looxa jilicsan, ku dar xoojinta rakibidda iyo magdhowga dhumucda guddiga jilicsan.
3.2 Qalabka: PI/PET/FR4/SUS
3.3 Habka isku dhafka:
PSA (xabagta xasaasiga ah ee cadaadiska): Nooca xasaasiga ah cadaadiska (sida taxanaha 3M)
Dejinta kulaylka: Heerkulbeegga (xoogga isku-xidhka, caabbinta dareeraha, caabbinta kulaylka, iska caabinta gurguurta)

4, Single Flex PCB, Double Flex PCB, Multi Flex PCB

4.1 Hal dhinac

4.2 Laba dhinac

4.3 Guddi isku dhafan

4.4 Farshaxan

4.5 Multilayer

4.6 Flex Rigid PCB

Haddii aad wax su'aal ah, fadlan RFQ .