other
Kayayyaki
Gida PCB FABRICATION PCB mai ƙarfi Farashin FR4 PCB Multi-Layer Printed Circuit Board PCB al'ada Manufacturing Supplier

Multi-Layer Printed Circuit Board PCB al'ada Manufacturing Supplier


  • Abu NO:

    ABIS-FR4-014
  • Layer:

    2
  • Abu:

    FR-4
  • Kauri da Aka Ƙare:

    1.0mm
  • Kaurin Copper mai ƙarewa:

    1 oz
  • Nisa/Sarari Min Layi:

    ≥3mil(0.075mm)
  • Min Hole:

    ≥4mil(0.1mm)
  • Ƙarshen Ƙarshen Sama:

    ENIG
  • Launin Mashin Solder:

    Baki
  • Launin Almara:

    Fari
  • Aikace-aikace:

    Kayan Wutar Lantarki na Masu Amfani
  • Cikakken Bayani

Gabatarwa FR4 PCB


--Ma'anarsa

FR yana nufin "mai kare harshen wuta," FR-4 (ko FR4) shine ƙimar darajar NEMA don ƙarfin gilashin gilashin epoxy laminate, kayan da aka haɗa da su. saƙa da fiberglass zane tare da epoxy guduro daure wanda ya sa ya zama madaidaicin madaidaicin kayan aikin lantarki akan allon da'ira da aka buga.

- Ribobi da Fursunoni na FR4 PCB


  • Kayan FR-4 ya shahara sosai saboda kyawawan halaye masu yawa waɗanda za su iya amfanar allon da'ira.Baya ga kasancewa mai araha kuma mai sauƙin aiki tare da shi, injin insulator ne mai ƙarfi mai ƙarfi mai ƙarfi.Bugu da kari, yana da m, juriya danshi, zafin jiki da kuma nauyi.
  • FR-4 abu ne mai dacewa da yadu, sanannen galibi don ƙarancin farashi da kwanciyar hankali na inji da na lantarki.Duk da yake wannan kayan yana da fa'idodi masu yawa kuma yana samuwa a cikin nau'ikan kauri da girma dabam, ba shine mafi kyawun zaɓi ga kowane aikace-aikacen ba, musamman manyan aikace-aikacen mitoci kamar RF da ƙirar microwave.



- Tsarin PCB Multi-Layer


Multilayer PCBs yana ƙara haɓaka da ƙima da ƙima na ƙirar PCB ta ƙara ƙarin yadudduka sama da yadudduka na ƙasa waɗanda aka gani a allon fuska biyu. Multilayer PCBs an gina su ta hanyar laminating nau'ikan yadudduka daban-daban.The Yadudduka na ciki, yawanci allunan da'ira mai gefe biyu, ana tattara su tare, tare da yadudduka masu rufewa a tsakanin da tsakanin tagulla-rubutun don yadudduka na waje.Ramukan da aka tona ta cikin allo (vias) za su yi haɗin gwiwa tare da nau'ikan allon daban-daban.



Daga ina kayan resin ke fitowa daga ABIS?


Yawancin su daga Shengyi Technology Co., Ltd. (SYTECH), wanda ya kasance kamfani na biyu mafi girma na CCL a duniya a fannin tallace-tallace, daga 2013 zuwa 2017. Mun kafa dangantakar hadin gwiwa ta dogon lokaci. tun 2006. The FR4 guduro abu ( Model S1000-2, S1141, S1165, S1600 ) ana amfani da su musamman don kera allunan da'ira bugu guda ɗaya da mai gefe biyu da kuma allunan Layer Layer.Anan ya zo da cikakkun bayanai don bayanin ku.


  • Don FR-4: Sheng Yi, King Board, Nan Ya, Polycard, ITEQ, ISOLA
  • Don CEM-1 & CEM 3: Sheng Yi, King Board
  • Don Babban Mita: Sheng Yi
  • Don Maganin UV: Tamura, Chang Xing (* Akwai launi: Green) Solder for Single Side
  • Don Hoton Liquid: Tao Yang, Resist (Wet Film)
  • Chuan Yu (* Launuka masu samuwa: Farar, Rawaya mai Imani mai siyarwa, Purple, Red, Blue, Green, Black)



Ƙarfin Manufacturing PCB


ABIS ya kware wajen kera kayayyaki na musamman don PCB mai tsauri, kamar: CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base , da dai sauransu. A ƙasa akwai taƙaitaccen bayanin FYI.



Abu

Speci.

Yadudduka

1 ~ 20

Kaurin allo

0.1mm-8.0mm

Kayan abu

FR-4, CEM-1 / CEM-3, PI, High Tg, Rogers, PTEF, Alu / Cu Base, da dai sauransu

Girman Panel Max

600mm × 1200mm

Girman Ramin Min

0.1mm

Min Layin Nisa/Sarari

3mil(0.075mm)

Haƙuri na Ƙimar allo

0.10mm

Insulation Layer Kauri

0.075mm - 5.00mm

Out Layer Copper Kauri

18 - 350

Ramin Hakowa (Mechanical)

17 - 175 pm

Ƙarshen Ramin (Mechanical)

0.10mm - 6.30mm

Haƙurin Diamita (Mechanical)

0.05mm

Rajista (Makanikanci)

0.075mm

Rabo Halaye

16:1

Nau'in Mashin Solder

LPI

SMT Mini.Nisa Mashin Solder

0.075mm

Mini.Solder Masks

0.05mm

Toshe Ramin Diamita

0.25mm - 0.60mm

Haƙuri na Kula da Cututtuka

10%

Ƙarshen saman

ENIG, OSP, HASL, Chem.Tin/Sn, Flash Gold

Soldermask

Kore/Yellow/Baki/Fara/Ja/Blue

Silkscreen

Ja/Yellow/Baki/Fara

Takaddun shaida

UL, ISO9001, ISO14001, IATF16949

Buƙatar Musamman

Ramin makafi, Yatsan Zinare, BGA, Tawada Carbon, abin rufe fuska, tsarin VIP, Plating Edge, Rabin ramuka

Kayayyakin Kayayyaki

Shengyi, ITEQ, Taiyo, da dai sauransu.

Kunshin gama gari

Vacuum+Carton



Tsarin Kera PCB mai yawan Layer



  • Tsarin yana farawa tare da zayyana Layout na PCB ta amfani da kowane software na ƙirar PCB / CAD Tool ( Proteus, Eagle, ko CAD ).
  • Dukkanin matakan da suka rage na Tsarin Kera Na'urar Wutar Wuta Mai Tsari iri ɗaya ne da PCB Sided Sided ko PCB mai Sided biyu ko PCB Multi-Layer.





Multi-Layer PCB Lokacin Jagora


Kashi Q/T lokacin jagora Daidaitaccen Lokacin Jagoranci Samar da Jama'a
Gefe Biyu 24h 3-4 kwanakin aiki 8-15 kwanakin aiki
4 Layer 48h ku 3-5 kwanakin aiki 10-15 kwanakin aiki
6 Layers 72h ku 3-6 kwanakin aiki 10-15 kwanakin aiki
8 Layers 96h ku 3-7 kwanakin aiki 14-18 kwanakin aiki
10 Layers 120h 3-8 kwanakin aiki 14-18 kwanakin aiki
12 Layers 120h 3-9 kwanakin aiki 20-26 kwanakin aiki
14 Layers 144h 3-10 kwanakin aiki 20-26 kwanakin aiki
16-20 Layers Ya dogara da takamaiman buƙatun
20+ Layers Ya dogara da takamaiman buƙatun


Ta yaya ABIS ke Aiki da Matsalolin Masana'antu a cikin FR4 PCB?


- Shiri Ramin

Cire tarkace a hankali & daidaita ma'aunin injin rawar soja: kafin a saka ta tare da jan karfe, abis yana mai da hankali sosai ga duk ramukan akan fr4 pcb da aka bi da su don cire tarkace, rashin daidaituwa na farfajiya, da smear epoxy, ramukan mai tsabta suna tabbatar da plating cikin nasara a manne ga bangon rami. .Hakanan, a farkon aiwatarwa, ana daidaita ma'aunin injin rawar soja daidai.


- S urface Shiri

Deburing a hankali: ƙwararrun ma'aikatan fasahar mu za su sani kafin lokaci cewa hanya ɗaya tilo don guje wa mummunan sakamako ita ce tsammanin buƙatar kulawa ta musamman da ɗaukar matakan da suka dace don tabbatar da cewa an yi aikin a hankali kuma daidai.


- T Haɓakar Haɓaka na hermal

An saba da ma'amala da kayan daban-daban, abis zai iya yin nazarin haɗin gwiwa don tabbatar da cewa ya dace.sa'an nan kuma kiyaye amincin dogon lokaci na cte (ƙididdigar haɓakawar thermal), tare da ƙananan cte, ƙananan yuwuwar da aka sanya ta cikin ramuka za su gaza daga maimaita jujjuyawar jan ƙarfe wanda ke haifar da haɗin gwiwar Layer na ciki.


- Sikeli

Abis sarrafa da'irar yana haɓaka ta hanyar sanannun kashi cikin tsammanin wannan asarar ta yadda yadudduka za su dawo zuwa girman da aka ƙera su bayan an gama zagayowar lamination.Har ila yau, ta yin amfani da shawarwarin sikeli na masana'anta na laminate a haɗe tare da bayanan sarrafa tsarin ƙididdiga na cikin gida, don buga abubuwan sikelin da za su yi daidai da lokaci a cikin wannan yanayin masana'anta.

 

- Machining

Lokacin da lokaci ya yi don gina pcb ɗin ku, abis ku tabbata cewa zaɓaɓɓen ku yana da kayan aiki masu dacewa da ƙwarewa don samar da shi daidai a farkon gwaji.






Marufi & Bayarwa


Kamfanin ABIS CIRCUITS ba kawai ƙoƙarin ba abokan ciniki samfuri ne mai kyau ba, har ma da kula da bayar da cikakkiyar fakitin aminci.Hakanan, muna shirya wasu keɓaɓɓun sabis don duk umarni.


-Marufi na gama gari:

  • PCB: Jakar da aka rufe, Jakunkuna na Anti-static, Kartin da ya dace.
  • PCBA: Jakunkuna kumfa na Antistatic, Jakunkuna masu tsattsauran ra'ayi, Kartin da ya dace.
  • Marufi na Musamman: Za a buga kwali a waje da sunan adireshin abokin ciniki, alama, abokin ciniki yana buƙatar ƙayyade wurin da ake nufi da sauran bayanai.

- Tukwici na Bayarwa:

  • Don ƙaramin kunshin, muna ba da shawara don zaɓar byExpress ko sabis na DDU shine hanya mafi sauri.
  • Don kunshin nauyi, mafi kyawun bayani shine ta hanyar sufurin teku.



Sharuɗɗan Kasuwanci
- Sharuɗɗan Isar da Karɓa
FOB, CIF, EXW, FCA, CPT, DDP, DDU, Bayarwa, DAF


-- Kudin Biyan Da Aka Karɓa
USD, EUR, CNY.


- Nau'in Biyan Da Aka Karɓa
T/T, PayPal, Western Union.


Rahoton da aka ƙayyade na ABIS

Don tabbatar da ingantacciyar magana, tabbatar da haɗa waɗannan bayanan don aikinku:

  • Cikakkun fayilolin GERBER gami da jerin BOM
  • Yawan yawa
  • Juya lokaci
  • Bukatun Panelization
  • Abubuwan Bukatun Kayayyakin
  • Kammala buƙatun
Za a isar da ƙimar ku ta al'ada a cikin sa'o'i 2-24 kawai, ya danganta da rikitaccen ƙira.

Da fatan za a sanar da mu don kowane sha'awa!

ABIS yana kula da kowane odar ku ko da yanki 1!



Bar Saƙo

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Haƙƙin mallaka © 2023 ABIS CIRCUITS CO., LTD.Duka Hakkoki. Ƙarfi ta

IPV6 cibiyar sadarwa tana goyan bayan

saman

Bar Saƙo

Bar Saƙo

    Idan kuna sha'awar samfuranmu kuma kuna son ƙarin cikakkun bayanai, da fatan za a bar sako a nan, za mu ba ku amsa da zaran mun iya.

  • #
  • #
  • #
  • #
    Sake sabunta hoton